PC3200 DDR SDRAM Dual Pack

512MB PC3200 Level2 Dual Pack (2x256MB)

Two pieces of 256MB Hand tested in dual channel board 2-2-2 @ 400MHz ? 3.2GB/s Single Bank ? 32Mx64 Module 32Mx8 chip density Jet Black 6-Layer PCB 168pin 2.5V - 2.75V ? Unbuffered ? Heatspreader colors vary

Our PC3200 is built on a custom 6 layer PCB using the highest quality 5 ns discreet components available in the memory industry. Through fine-tuning of the resistor network on the PCB we have been able to achieve the highest possible speed beyond 400 MHz while maintaining the capability for low latency operation. Our custom-designed Heat Spreader* reduces the risk of thermal runaway of localized hot spots within the memory core and further increases overclocking margins of the modules. Tested compatible with VIA, AMD, Intel, NVidia and Sis chipsets. Overclockability of your system is dependent on all other components including but not limited to Motherboard, CPU, graphics and PCI cards and other peripheral devices. Our PC3200 eliminates the memory as a potential bottleneck when overclocking. Tested on motherboards with the KT400, P4X400 and NForce2 chipsets most of which are officially supporting the PC3200 (DDR 400) spec. Please check your motherboard manual for more information. *Heat spreader color may vary from photo. Tampering with heatspreader voids warranty.

You’ll notice the lack of the latter two common memory timings, tRAS and CMD. Click the question marks beside the specs to read up on Mushkin’s explanation for the omission. The most important timing is present though, namely a CAS latency of 2. Mushkin have also implemented a tweaked SPD, which tells your motherboard that this is indeed fast memory as opposed to the more generic Winbond ram which chips it most likely uses, which subsequently has slower default timings. Unfortunately, not all motherboards respond to the SPD, which means that you may have to do it manually after all.

P.S. Did you click the question marks? They're there for a reason, you know.